Via scp, wget or any other tool download CHR raw image (.img file) into this directory.Default local storage is located in: var/lib/vz/images/(VM_ID) Log into ProxMox host via SSH and navigate to VM image directory.Make sure that VM storage is on local storage (this way there will no need to work with LVM config side, and disk image can be moved later on to LVM or other desired storage if needed).conf file to make sure you get the syntax right 8 got up to 55% during peak time last night.Note: It's a good idea to create a second test VM so you can refer to it's. One odd thing I'm seeing in Winbox is, CPUs 0 and 8 are always being used more than any of the other ones. And the Dell BIOS has Performance mode enabled I also set the SFP+ Network Devices to use the VirtIO model and 8 Multiqueues. In Proxmox, I have the VM's Processors configured as such: But once it got to 2,800 Mbps of traffic, the CPU spiked to 45% and I started seeing 5% packet loss across multiple interfaces. It had been working decently well throughout the day, with its CPU-to-bandwidth ratio being about 1% CPU for every 100Mbps of traffic. RouterOS CHR 6.46.8 (P unlimited license) Dell PowerEdge R630 with Intel® Xeon® Processor E5-2680 v3 It's having some performance issues and I'm looking for advice on how to resolve them. I'm running CHR on Proxmox Virtual Environment as a core/edge router for our network.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |